Dinaxine® 2% LIQUID
STABILIZED CHLORINE DIOXIDE

Advanced synergetic sanitizing technology

KILLS THE AVIAN INFLUENZA VIRUS

Advanced stabilized chlorine dioxide sanitizing technology

WHAT IS Dinaxine®?

  • Dinaxine® is a 2% solution of stabilized chlorine dioxide. It is a high-performance product specially formulated for applications where the following attributes are important:
  • No odor
  • No taste imparted
  • Non-corrosive
  • Very low toxicity, (Class 3)

DINAXINE® is an ideal replacement for chlorine, providing all of chlorine’s benefits without any of its weaknesses and detriments.

DINAXINE® does not chlorinate organic material.

DINAXINE® significantly decreases trihalomethanes (THMs), halo acetic acids (HAAs) and other chlorinated organic compounds. This is important in the primary use for chlorine dioxide, water disinfection.

WHAT ARE THE ADVANTAGES OF DINAXINE®?

  • No buildup, eliminating need for time consuming and costly cleanup and removal.
  • Does not contain or release formaldehyde.
  • Effective against a broad spectrum of microorganisms.
  • Surfactant action enhances cleaning.
  • Ideal for critical areas, ex: hatcheries, processing plants, farm equipment.
  • Functions well over a broad temperature range.
  • Effective performance on a wide variety of construction materials.
  • Fast acting.
  • Properly diluted solutions are not detrimental to waste treatment systems.
  • Not affected by hard water.
  • Compatible with water tolerant metals avoiding etching, pitting, or scale formation.

WHAT ARE THE PROPERTIES OFDINAXINE®

  • More effective than chlorine
  • Lower dose inclusion rate
  • Results in a lower environmental impact
  • A more selective oxidizer than chlorine
  • 2.6 times the oxidizing capacity of chlorine
  • Unlike chlorine, it does not react with ammonia, ammonium or most organic compounds.
  • Unlike chlorine, DINAXINE® is biocidal over a very broad pH range.
  • DINAXINE® is a broad-spectrum biocide.
  • The majority of applications with DINAXINE® will be used to control microorganisms.
  • All of these applications are approved uses by the EPA and FDA.

DINAXINE®IS EXCELLENT FOR:

  • Disinfecting drinking water.
  • THM and HAA control in drinking water.
  • Bacterial control in cooling water
  • Bacterial control in paper processing.
  • Sanitizing the uncut fruits and vegetables.
  • Controlling bacteria in produce flume water.
  • Controlling bacteria in poultry processing.
  • Controlling bacteria in beverage and brewing equipment.
  • Sanitizing food processing facilities and equipment.

OTHER USES OF DINAXINE® are as a chemical oxidizing agent that destroy undesirable chemicals:

  • Odor control by the oxidation of hydrogen sulfide and organo-sulfur compounds.
  • Toxic chemical destruction by the oxidation of phenols and mercaptans.
  • Oxidative color removal and bleaching.

PRODUCT PERFORMANCE FOR DINAXINE®

Suitable for use on a wide variety of surfaces. In actual field use, it reduces contamination on commonly used materials of construction, including stainless steel, aluminum, painted and unpainted concrete, plastic, rubber, wood, and paper. Furthermore, it is no more damaging to these materials than is water. Even after repeated applications, there was no detectable buildup or tacky residue remaining after the treated surfaces had dried. DINAXINE® also reduces airborne microorganism counts when applied via existing humidification or individual fogging equipment. There have been no adverse effects reported in the hatch rate, grow-out rate, or general health appearance of fowl that were hatched and processed in

DINAXINE® treated areas.

APPLICATIONS

Antimicrobial Activity

DINAXINE®: A Versatile Disinfectant

DINAXINE® kills spores, viruses, fungi and algae within the first minute of contact over a wide temperature range and reduces contact time 3-10 times over chlorine and 40-60 times over chloramines while being effective over a wide pH range. DINAXINE® exhibits a superior residual decay rate over ozone and is not as susceptible to varying levels of total organic carbon (TOC) making it more cost effective over ozone at elevated TOC levels in water.

Disinfectant
Microorganism Free Chlorine pH 6 to 7 Chloramines pH 8 to 9 DINAXINE® pH 6 to 7 Ozone pH 6 to 7
E. Coli 0.034 – 0.05 95 – 180 0.4 – 0.75 0.02
Polio 1 1.1 – 2.5 768 – 3740 0.2 – 6.7 0.1 – 0.2
Rotavirus 0.01 – 0.05 3806 – 6476 0.2 – 2.1 0.006 – 0.06
G. lamblia cysts 47 – >150 2200(1) 26(1) 0.5 – 0.6
G. muris cysts 30 – 630 1400 7.2 – 18.5 1.8 – 2.0
Cryptosporidium parvum 7200(2) 7200(3) 78(3) 5 – 10(2)

DINAXINE® FOR ANIMAL HEALTH APPLICATIONS Summary of Antimicrobial Efficacy

The following results were obtained using Dinaxine®. These results should not be extrapolated for other chlorine dioxide-based products that may take much higher concentrations to achieve similar biocidal activities.

TEST ORGANISM CONTACT TIME CONCENTRATION RESULT
Alicyclobacillus acidoterrestris 10 min 30 ppm 99.998% kill
Aspergillus fumigatusspores 60 sec 100 ppm 99.998% kill
Bacillus cereus spores 5 min 200 ppm 99.999% kill
Campylobacter jejuni 30 sec 30 ppm 99.9% kill
Candida albicans 60 sec 100 ppm 99.99999% kill
Canine Parvovirus 10 min 500 ppm 100% viricidal
Cladosporium 30 sec 500 ppm 99.999% kill
Coxsackie Virus 5 min 550 ppm 99.9% kill
Erwiniacolor carotovora carotovara 60 sec 50 ppm 99.999% kill
Escherichia coli O157:H7 60 sec 3 ppm 99.999 % kill
Herpes Simplex Virus Type 1 5 min 550 ppm 99.9% kill
Lactobacillus sp. 60 sec 20 ppm 99.999% kill
Legionella pneumophila 60 sec 25 ppm 99.999% kill
Listeria monocytogenes 60 sec 25 ppm 99.9999% kill
Mycobacterium bovis (tuberculosis) 10 min 500 ppm 99.9999% kill
Newcastle Disease virus 10 min 500 ppm 100% kill
Pediococcus sp. 60 sec 20 ppm 99.999% kill
Polio Virus Type 2 5 min 550 ppm 99.9% kill
Proteus mirabilis 60 sec 100 ppm 99.999999% kill
PRRS virus 60 sec 312 ppm 100% viricidal
Pseudomonas aeruginosa 60 sec 5 ppm 99.9999% kill
Pseudorabies virus 10 min 500 ppm 100% viricidal
Rhino Virus 5 min 550 ppm 99.9% kill
Saccharomyces cerevisiae 60 sec 30 ppm 99.999% kill
Salmonella choleraesuis 10 min 500 ppm 100% kill
Salmonella typhimurium 60 sec 100 ppm 99.999% kill
Stachybotrys chartarum 60 sec 100 ppm 99.997% kill
Staphylococcus aureus 60 sec 30 ppm 99.999% kill
Streptococcus faecalis 60 sec 100 ppm 99.99999% kill
Streptococcus faecium 60 sec 100 ppm 99.9999% kill
Trichophyton mentagrophytes 5 min 500 ppm 100% kill

DINAXINE® FOR SEAFOOD

DINAXINE® is an FDA-approved seafood process operation additive.

DINAXINE® is a highly-refined 2% stabilized chlorine dioxide solution, scientifically-proven to inhibit antimicrobial and enzymatic activity. This research-based additive controls a broad spectrum of microorganisms. As a pioneering product in specialty chlorine dioxide, DINATEC has been a leader in technical advances and government regulatory approvals. As a result, DINAXINE®s formulation is virtually an odorless, clear, stable solution, which can be stored, transported and used without special consideration. Whether you’re on the boat, at the dock or in the processing plant, used properly,

DINAXINE® is non-corrosive, easy to use and most importantly, Safe.

DINAXINE® is shipped as 2% stabilized chlorine dioxide solution and does not require any special USDOT permits.

HAS DINAXINE® BEEN TESTED AND SHOWN TO BE EFFECTIVE?

Tested extensively at the University of Florida’s Food Science and Nutrition Department, DINAXINE®’s overwhelming success resulted in its approval by the FDA. DINAXINE® testing included a series of microbiological, quality improvement analysis, shelf-life extension, nutritional value outcomes, and organoleptic evaluations. In addition, DINAXINE®’s positive effects were proven on a wide variety of seafood products including Salmon, Grouper, Shrimp and Scallops, using both whole fish and fillets.

HOW IS DINAXINE® used?

Depending on conditions, DINAXINE® is used at concentrations of between 40 and 50 ppm. You can activate the solution with a small amount of GRAS acid (generally recognized as safe) – preferably citric acid before applying. This activation produces chlorine dioxide, and nearly instantly produces a highly-effective antimicrobial and enzymatic inhibitor. Once activated, add DINAXINE® to the processing operation: water, ice, and washing or rinsing water. Most importantly, add DINAXINE® when transporting your seafood to extend freshness.

WHAT CAN I EXPECT FROM USING DINAXINE®?

DINAXINE® will inhibit antimicrobial and enzymatic activity as well as eliminate odors without affecting nutritional quality. In addition, seafood products treated with DINAXINE® have added organoleptic qualities and increased shelf life. Adding DINAXINE® to ice when transporting seafood will extend freshness.

WHAT IS THE REGULATORY STATUS OF THE FDA FOOD ADDITIVE PETITION?

The use of stabilized chlorine dioxide to control microorganisms in seafood process operations is published in the Code of Federal Regulations at 21 CFR 173.325. It should be noted that any seafood that is intended to be consumed raw will be subject to a potable water rinse prior to consumption.

HARD SURFACE SANITIZING

It is recommended that Dinaxine® be used as the general-purpose equipment and surface sanitizer to assure maximum pathogen control within the processing facility. Internationally recognized as one of the best sanitizers available, Dinaxine® has been accepted as the premium sanitizer for critical point microbial control. It has been proven effective against Listeria, E. coli O157: H7, Salmonella, Campylobacter, and numerous other organisms of human health concern. Uniquely, Dinaxine® is extremely effective against biofilms which harbor and protect disease-causing organisms. The tandem use of DINAXINE® and Dinaxine® in your sanitation program will ensure that your facility will meet the guidelines set forth by HAACP standards. Most importantly, the assurance knowing your seafood products are safe and of the highest quality.

DINAXINE® for Red Meat Antimicrobial Intervention for the Red Meat Industry

DINAXINE® is a highly refined blend of stabilized chlorine dioxide. Highly effective against Salmonella, E. coli 0157:H7, and Listeria.

DINAXINE® is a state-of-the-art total antimicrobial intervention program. Approved for use under 21 CFR 173.325.

Industry Benefits Product Benefits
  • Maximize bacteria control to maximize profits.
  • Your plant will develop/maintain its reputation for quality products.
  • Regulatory inspectors have a high degree of trust in stabilized chlorine dioxides antimicrobial intervention.
  • HACCP compliance.
  • No influence on flavor.
  • Ultra-high antimicrobial activity
  • Low corrosion potential at use concentrations
  • Does not chlorinate (no THM formation)
  • Effective over a broad pH range (1-10)
  • Resists neutralization due to organic load
  • Economical to use
  • Economical, efficient and reliable delivery systems
  • No effect on organoleptic properties
  • FDA approved as stabilized chlorine dioxide
  • Secondary direct food additive as a processing aid; not reportable on label
  • Approved for carcass, parts, comminuted and RTE red meat products

DINAXINE® APPLICATIONS, CFR APPROVALS AND DOSE LEVELS

APPLICATION CFR APPROVAL # DOSE LEVEL
Flour Bleaching 21 CFR 137.105 Minimum Level Needed
Cherry Bleaching GRAS via FDA letter on 6-24-82 Minimum Level Needed
Sanitizing Solution 21 CFR 178.1010(b)(34) and 21 CFR 178.1010(c)(29) 100-200ppm
Uncut and Unpeeled Fruits and Vegetables NFPA and FDA correspondence on 3-11-92 Up to 5ppm followed by potable water rinse
Whole Carrots NFPA and FDA correspondence on 3-11-92 Up to 5ppm followed by potable water rinse
Shelled Beans & Peas (unblenched with intact cuticles) NFPA and FDA correspondence on 12-92 Up to 5ppm followed by potable water rinse
Corn (husked on uncut cob) NFPA and FDA correspondence on 3-11-92 Up to 5ppm followed by potable water rinse
Potatoes Cut & Peeled FDA correspondence on 11-20-95 1ppm followed by potable water rinse
Tomatoes NFPA and FDA correspondence on 3-11-92 Up to 5ppm followed by potable water rinse
Fruits and Vegetables (Cut & Peeled) 21 CFR 173.300 Up to 3ppm in water used to wash fruits and vegetables, followed by potable water rinse or by blanching/cooking/canning
Poultry Process Water contacting whole fresh poultry carcasses 21 CFR 173.300 Up to 3ppm residual chlorine dioxide in process water contacting whole fresh poultry carcasses
Poultry Process Water 21 CFR 173.325 500-1200ppm in carcass spray or dip solution and 50-150ppm in pre-chiller or chiller solution
Processing Red Meat, Read Meat Parts and Organs 21 CFR 173.325 500-1200ppm in carcass spray or dip solution
Processed, Comminuted and Formed Meat Products (i.e. hot dogs/sausages) 21 CFR 173.325 500-1200ppm as a dip/spray
Processed Fruits and Vegetables 21 CFR 173.325 500-1200ppm as spray/dip
Sanitizing Solution 21 CFR 178.1010(b)(46) and 21 CFR 178.1010(c)(40) 100-200ppm
Water or Ice in Contact with Seafood 21 CFR 173.325(d) 40-50ppm
Raw Agricultural Commodities 21 CFR 173.325(e) 500-1200ppm followed by potable water rinse or blanching/cooking/canning